Manufacturers > Sensus > Direct Acting Gas Pressure Regulators (3)

Industrial Gas Service Regulators

Sensus Metering Systems

  

Click logo for manufacture site
If you would like application assistance, please give us a call at the number above, or fill out our regulator help form and we will be happy to give you a call back.
 
Sensus Regulator Series 243-12-1, 243-12-2, 243-8-1, 243-8-2, 243-8HP
Sensus 243-12 industrial gas regulator
 

These large capacity service regulators are designed and built for commercial, industrial, and gas distribution work. They are right at home in such places as factories and foundries, district regulator stations, commercial laundries and laundromats, motels, hotels and apartments, bakeries, restaurants, schools, churches, and hospitals.
  
The versatile 243 is used for all kinds of gas fueled equipment such as boilers, burners, furnaces, ovens, heaters, kilns, engines, air conditioners, etc. Remarkable field versatility results from the union connection between the fully interchangeable bodies and diaphragm-case assemblies. They are easy to install, adjust, inspect, and service in all kinds of piping arrangements.
  
While used primarily for natural gas services, Model 243 regulators perform equally well on LPG vapor, air, dry CO2, nitrogen, and other inert gas applications.

Available Pipe Sizes:
2", 1-1/2", 1-1/4" NPT Screwed
2" Flanged ANSI 125
Interchangeable Orifices: .207" - 1-1/4"

Downloads:

Sensus 243 Regulator Illustration

Sensus Regulator Series 143-80-1, 143-80-2 and 143-80-2HP 
Sensus 143-80 industrial gas regulator
 

Sensus Model 143-80 domestic service regulators can be used on both residential and small commercial and industrial applications. With a variety of body sizes, loading springs, and orifices sizes, these regulators can provide the outlet pressure ranges and capacities to fit most applications for a 6" service diaphragm regulator.

The model 143-80 design provides the popular union nut connectional, not requiring bolts or screws to connect the body to the diaphragm assembly. It is available with an internal relief valve (IRV), and with a low pressure cutoff (LPCO). Simple, rugged, precise and outstanding performance.

Available Pipe Sizes: 1-1/4", 1" and 3/4" NPT
Interchangeable Orifices: 1/8" - 5/8"
Valve Body: Cast Iron - up to 125 psig working pressure
Vent Connection: 1" NPT
Corrosion Protection: Cases dip primed chromate conversion coating, enamel topcoat.
Available with an Internal Relief Valve set to relieve at approximately 7-10” w.c. above normal outlet pressure setting.

Downloads:

Sensus 143 Regulator Illustration

Sensus Regulator 496
Sensus 143-80 industrial gas regulator
 

Sensus Model 496 domestic service regulator can be used on both residential and small commercial and industrial applications. The regulator is available with a variety of body sizes, loading springs, and orifices sizes. The 4" roll-out diaphragm provides exceptional performance, and provides capacities that normally require 6" diaphragm regulators. An internal relief valve is a standard feature in the model 496.
  
The Sensus Model 496 (replaces the Sensus Model 043-B).  

Available Pipe Sizes: 3/8", 1/2, 3/4" and 1" NPT
496-20 Straight Body: All Outlet Sizes
496-10 Angle Body: 3/4" and 1" Outlet only
Interchangeable Orifices: 1/8" - 1/2"
Valve Body: Cast Iron - up to 125 psig working pressure
Vent Connection: 1" NPT
Corrosion Protection: Cases dip primed chromate conversion coating, enamel topcoat.
Available with an Internal Relief Valve set to relieve at approximately 7-10” w.c. above normal outlet pressure setting.

Comparable Model: Bryan Donkin 260

Downloads:

Sensus 143 Regulator Illustration