Milwaukee, WI: 414.332.6000 l Eagan, MN: 651.890.0720

Honeywell Eclipse Peek-A-Flame

Honeywell Eclipse Peek-A-Flame

  • Sensor module that activates a relay when a flame is detected by an ultraviolet sensor or a flame rod
  • UL recognized & FM approved
  • Plugs into an industry standard 11-pin base
  • Test point at the front permits direct reading of the flame signal level, 0-12 V DC

Description

The Peek-A-Flame Relay Series 7000 is a sensor module that activates a relay when a flame is detected by an ultraviolet sensor or a flame rod. The Peek-A-Flame is for flame detection only; it will not detect safe start, safety lockout, load switching or any other safety procedures.

Specifications

Applications:
For use with ultraviolet scanners, sold separtely (p.n. 49600-90, 49600-91, 49602-91, 20898) or flame rods

Voltage:
120 VAC, 50/60 Hz, .1 Amp (p.n. 49700) or
220 VAC, 50/60 Hz, .1 Amp (p.n. 49703)

Electrical Current Loading:
2A or less on pins 4, 5 and 6

Flame Fail Response Time:
3 seconds

Temperature Range (Ambient):
-40° to +140°F

Mounting Base (sold separately):
Standard 11-pin relay base (p.n. 49701)
Spring retaining kit (p.n. 49704)

Technical Documentation

Honeywell Eclipse Peek-A-Flame Technical Documentation