Manufacturers > Fox Thermal Instruments

Thermal Mass Flow Meters

Fox Thermal Instruments
Click logo for manufacture site
Model FT1 Flow Meter

Fox Instruments FT1 Flow Meter
 
  • Measures process gas flow rate/total and temperature
  • Insertion probes: for 1.5" to 70" pipes
  • Equipped with the DDC-Sensor™ (Direct Digitally Controlled)
  • Gas-SelectX® gas selection menu. Choose from available list of gases/gas mixes to measure flow. NIST-traceable calibration
  • One standard 4 to 20mA output proportional to mass flow rate; HART communication option
  • One output is selectable for pulse/alarm, RS485 Modbus RTU, or BACnet MS/TP
  • Optional on-board display and configuration panel
  • A USB connection is standard (free FT1 View™ Software)
  • Flow Accuracy for air: ±1% R ±0.5% FS; Flow accuracy for other gases: ±1.5% R ±0.5% FS


Links:

Industrial Furnace Gas Burners

Model FT2A Flow Meter

Fox Instruments FT2A Flow Meter
 
  • MEASURES: Mass Flow Rate and Temperature
  • NO. OF 4 TO 20 mA OUTPUTS: Two
  • PULSE OUTPUT: One isolated digital output that can be used for frequency or alarm
  • DISPLAY: Standard, LCD, 2 line X 16 character backlit: show flow rate, total, temperature, elapsed time, alarms
  • COMMUNICATIONS: Standard USB port, optional BACnet MS/TP, RS485 Modbus, Profibus-DP, DeviceNet& Ethernet Modbus TCP
  • APPROVALS: FM and FMc approved for Class I, II, III, Division 2, Groups A, B, C, D, E, F, G, T4 hazardous locations; NEMA 4X approved; CE approved; Remote NEMA 4X electronics enclosure with explosion proof sensor j-box
  • CONTACT OR DISCRETE I/O: One discrete output for alarms & one discrete input to reset total. Discrete output unavailable if pulse output used
  • POWER INPUT: 24 VDC powered or optional 100 to 240VAC


Links:

Industrial Furnace Gas Burners

Model FT3 Flow Meter

Fox Instruments FT3 Flow Meter
 
  • MEASURES: Mass Flow Rate and Temperature
  • NO. OF 4 TO 20 mA OUTPUTS: Two
  • PULSE OUTPUT: One isolated digital output that can be used for frequency or alarm
  • DISPLAY: Optional, LCD, 2 line X 16 character backlit: show flow rate, total, elapsed time, process gas temperature and alarms
  • COMMUNICATIONS: A USB connection is standard (free FT3 View™ Software); Optional HART and RS485 Modbus
  • SAFETY APPROVALS: FM/FMc ATEX and IECEx approved
  • EMC APPROVALS: CE approved
  • CONTACT INPUT: One discrete input to reset total
  • POWER INPUT: 24 VDC powered or optional 100 to 240VAC


Links:

Industrial Furnace Gas Burners