Manufacturers > Eclipse > Ignition and Supervision Components
Click on an item for information

Ignition and Supervision Combustion Components

Eclipse Components

Eclipse
   
Click logo for manufacture site

Marshall W. Nelson provides combustion components, like these in our engineered applications.

Industrial Gas Burner Systems need various ignition and other supervision components, like these shown below and in the Marshall W. Nelson video to the right.

For over 50 years, we have been providing combustion system solutions for a variety of applications in the marketplace. Call us with your questions and to discuss your application.

 
 

 
T600 Flame Safeguard
AH MA Eclipse T600 Industrial Flame Safeguard
 

The T600 Flame Safeguard from Eclipse offers the most flexible, cost effective solution for burner control anywhere in the world. T600 is a single burner controller for use with direct or indirect-fired furnace or oven applications that require globally approved flame safety systems. T600 provides more of the features, options, and versatility users need, including programming flexibility, scalability and advanced diagnostics. It operates with a flamerod or UV scanner without changing models or modules. Program sequences and operating times can be customized to provide exacting burner control in virtually any application. T600 supports intermittent or continuous operation. Optional Modbus or Profibus communication is available to provide details at the operator’s location. T600 models are available with or without an integrated display.

Links:

Industrial Furnace Gas Burners

T600 UV Scanners
Eclipse Industrial UV Scanner
 

The UV 41HE high sensitivity flame detector responds to UV radiation from a flame and provides a simulated ionization signal to the T600 flame safeguard. The UV 42 flame detector responds to radiation and provides a 230 VAC signal to the second flame detector input of the T600. The UV 41HE and UV 42 are CE listed, CSA certified, FM approved and are only for use with T600-series flame safeguards. Both UV scanners are suitable for intermittent operation. For use in continuous operation applications, the UV 4x EM 1/1 self-check shutter module can be paired with either detector.

Links:

Industrial Furnace Gas Burners

Bi-Flame
Eclipse Bi-Flame
 

Now you can conveniently monitor, diagnose and troubleshoot dual-burner applications with computerized reliability and precision.

Eclipse Bi-Flame Monitoring Systems are specifically engineered to control the startup sequence and monitor the flame of two individual gas, oil or combination gas/oil burners sharing a common valve train. Bi-Flame controls two flames as a single burner and is the ideal solution for controlling burners that must operate as a pair.

Links:

Industrial Furnace Gas Burners

Veri-Flame
Eclipse Industrial Veri-Flame
 

Monitor, diagnose, troubleshoot and control single burner systems with individual valve trains.

Eclipse Veri-Flame Monitoring Systems carry the approvals necessary for application virtually anywhere in the world.

Versions are available to meet UL for Canada and the USA, FM, or CE standards.

Links:

Industrial Furnace Gas Burners

Multi-Flame
Eclipse Industrial Multi-Flame
 

The Eclipse Combustion Multi-Flame Burner Monitoring System controls the start-up sequence and monitors the flame of up to 20 individual gas, oil, or combination gas/oil burners connected to a common valve train. Its dynamic on-board testing checks for faulty relays, proof of valve closure, high and low fire switch interlocks, and shorted air switch.

Links:

Industrial Furnace Gas Burners

Peek-A-Flame
Eclipse ThermAir Industrial Burner
 

The Peek-A-Flame Relay Series 7000 is a sensor module that activates a relay when a flame is detected by an ultraviolet sensor or a flame rod. The Peek-A-Flame is for flame detection only; it will not detect safe start, safety lockout, load switching or any other safety procedures.

Links:

Industrial Furnace Gas Burners

Remote Display
Eclipse Industrial Remote Display
 

This remote display operates with either the 6000 Series Multi-Flame or the 6500 Series Bi-Flame. It is connected to either Series motherboard by a 15-pin port cable which must be purchased separately. This display provides alphanumeric messages which indicate burner status as well as annuciate lockout condition in the Multi-Flame or Bi-Flame systems.

Links:

Industrial Furnace Gas Burners

Veri-Flame UV Scanners
Eclipse Industrial UV Scanner
 

This sensor features high sensitivity ultraviolet (U.V.) for monitoring gas or oil flames which cycle on and off frequently. The Eclipse flame safeguard checks for a short-circuited, or "run-away" scanner at the beginning and end of each flame cycle. The scanner is UL listed, CSA certified and FM approved. It comes with a 6 foot cable lead. Safeguarded against reverse connection, the 90° U.V. Scanner operates with 6000 Series Multi-Flame and 6500 Series controllers.

Links:

Industrial Furnace Gas Burners

Heat Block Seal
Eclipse Industrial Heat Block Seal
 

The Eclipse Heat Block Seal is designed to protect ultraviolet flame scanners by sealing them from hot combustion gases and insulating them from heat transferred through the scanner pipe.

Links:

Industrial Furnace Gas Burners

Flame Equipment
Eclipse Industrial Flame Equipment
 

These documents have information on various components used in igniting and detecting burner flames including flamerods, igniters, insulators, ignition transformers, and connectors.

Links:

Industrial Furnace Gas Burners

Ignition Transformers
Eclipse Industrial Ignition Transformers
 

Eclipse ignition transformers have excellent mechanical and electrical properties.

Links:

Industrial Furnace Gas Burners

Peep Sights
Eclipse Industrial Burner Peep Sights
 

Eclipse peepsight assemblies can be used for various combustion needs. The single piece units are designed for installation on a burner.

The 2/3 union assemblies may be installed on or adjacent to a burner or the wall of the application itself.

Blast gate peepsights are designed with a sliding gate to isolate the peepsight from the furnace and are used on the appliance wall.

The rectangular peepsight assemblies are designed for mounting in a duct or for use as a furnace viewing port.

Links:

Industrial Furnace Gas Burners